The light given off by this fitting is mainly in a downward direction.

This product is suitable for use in a bathroom within regulated zone 1 or higher. Zone 1 is the area directly above the top edge of the bath or shower tray to a height of 2.25 meters from base.


This light fitting has an IEC protection class of 3.

This light has an International Protection Rating of IP65. The first digit gives this light complete protection against ingress and contact of dust, it is dust tight. The second digit shows a protection of the equipment inside the enclosure against ingress of water jets.

There is no fitted switch or dimmer within this light fitting.

This light requires 1 bulb(s) of the same type:
1 x GX5.3 Reflector (NOT included) Max Bulb Wattage = 50W Bulb Voltage = 12V

This product requires an input voltage of 12V via a transformer

This light fitting is suitable for installation onto a dimmer control circuit

This products requires a transformer to be bought separately to step down the voltage for the bulbs. It is possible to buy a transformer capable to operate more than one of these lights. Dimming products with transformers can result in the dimmer switch or the light itself buzzing. Using a compatible dimmer switch for the type of transformer will reduce this as much as possible.

Dimensions

Lighting Specification

Product References